Product ID:DARK CUTTING OIL, 7421
MSDS Date:01/02/1990
FSC:9150
NIIN:00N021001
MSDS Number: BLVRD

CROWN INDUSTRIAL PRODUCTS CO INC

STATE LINE ROAD
HEBRON, IL 60034
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 815-648-2424

Preparer: ROBERT E BAYTON

Cage: 92381

CROWN INDUSTRIAL PRODUCTS CO

350 HEBRON, IL 60034 US

Telephone: 815-648-2424

Cage: 92381

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED HEAVY

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: >70%

SULFURIZED FATTY MATERIAL

CAS: 61790-49-6

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038500

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:NOT EXPECTED TO BE AN
INHALATION PROBLEM. INGEST:NOT LIKELY. EYE:MAY CAUSE IRRITATION.
POSSIBLE CORNEAL INJURY. SKIN:PROLONGED CONTACT WILL CAUSE
DEFATTING OF SKIN LEADING TO IRRITATION AN D DERMATITIS. NOT LIKELY
TO BE ABSORBEDIN TOXIC AMOUNTS.
Explanation of Carcinogenicity:MINERAL OIL, PETROLEUM DISTILLATES,
HYDROTREATED HEAVY PARAFFINIC:GROUP 1 (IARC).
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL MD. EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES OR UNTIL
IRRITATION SUBSIDES. SKIN:REMOVE ALL CONTAMINATED CLOTHING. WASH
SKIN W/SOAP & WATER. INHAL:REMOVE FROM EXPOSURE IMMEDIATELY. IF
BREATHING I RREGULAR OR STOPPED, BEGIN ARTIFICIAL RESPIRATION &
ADMINISTER OXYGEN. INGEST:DO NOT INDUCE VOMITING. DRINK PLENTY OF
WATER.

Flash Point Method:COC
Flash Point:340F,171C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE FLASH POINT, MATL WILL
RELEASE FLAMM VAPS WHICH CAN BURN/BE EXPLO IN CONFINED AREAS IF
EXPOSED TO FLAME/SPARK. MISTS/SPRAYS MAY BE (SUPP DATA)

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
AREA. USE ABSORBENT MATERIAL TO SOAK UP SPILL. DO NOT FLUSH INTO
SEWER. PLACE IN SAFE CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE IN DIRECT SUNLIGHT. AVOID
TEMPERATURES ABOVE 120F FOR PROLONGED PERIODS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:RESPIRATORY PROTECTION PROGRAM SHOULD BE I/A/W
29 CFR 1910.134.
Ventilation:LOCAL EXHAUST IS ADEQUATE.
Protective Gloves:POLYETHYLENE OR NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING AND EQUIPMENT: SEE 29
CFR 1910.133 & 132.
Work Hygienic Practices:WASH SKIN W/SOAP & WATER.
Supplemental Safety and Health
EXPLO HAZ:FLAMMABLE AT TEMPERATURES BELOW FLASH POINT.

HCC:V6
Boiling Pt:B.P. Text:550F,288C
Vapor Pres:0.01
Vapor Density:NON-VOLAT
Spec Gravity:0.86-0.89
Evaporation Rate & Reference:0.01 (BUTYL ACETATE = 1).
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK BROWN FLUID/PETROLEUM ODOR.
Percent Volatiles by Volume:NONVOL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:OPEN FLAMES, SPARKS, ELECTRICAL ARCS.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY YIELD OXIDES
OF SULFUR & CO, CO2.

Waste Disposal Methods:DISPOSE OF I/A/W ALL LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.